Fluke 700HTPK-2 Hydraulic Test Pump Kit w/700HTP-2 & 700TTH10K

About this item

Product Description

700HTP-2:
*Pressure: 10000 psi, 700 bar
*Two pressure ports: 1/4 in. NPT female parallel thread fitting for reference gauge or pressure module; 1/4 in. NPT female parallel thread fitting for unit under test
*Provides up to 10000 psi using distilled water or mineral-based hydraulic oil
*Operate by pumping several strokes to prime system, then switch to high-pressure mode when resistance increases
*Integral pressure adjustment vernier knob varies pressurized volume by 0.6 cc
*Pressure variation achievable with vernier depends on nominal pressure and total pressurized volume
*With minimum volume, vernier provides 150 to 3000 psi (at 150 psi nominal) and 3000 to 10000 psi (at 3000 psi nominal)
*With minimum volume and no pressure, vernier can also provide 0 to 1.7 psi
*Larger volumes provide smaller range of adjustment, but greater resolution
*For use with 700, 750P, 710 and 720 Series

700TTH10K:
*Rating: 10,000 psi
* in. NPT connection for permanent mount to calibrator or test pump
*1/4 in. NPT male connector for connection to transmitter
*No tools required

Stock by Location

Location In Stock
MINNEAPOLIS 0
AIN 700HTPK-2
$2,052.99 /unit
Buy
Quantity Required:

Check Availability

Specifications

Group: Inspection Equipment
Item #: 2664
Product model number: 700HTPK-2
Location: MINNEAPOLIS
Suggested Kit: N/A
Loading...