Product Description
Pressure: 10000 psi, 700 bar. Two pressure ports: 1/4 in. NPT female parallel thread fitting for reference gauge or pressure module; 1/4 in. NPT female parallel thread fitting for unit under test. Provides up to 10000 psi using distilled water or mineral-based hydraulic oil. Operate by pumping several strokes to prime system, then switch to high-pressure mode when resistance increases. Integral pressure adjustment vernier knob varies pressurized volume by 0.6 cc.
Pressure variation achievable with vernier depends on nominal pressure and total pressurized volume.
With minimum volume, vernier provides 150 to 3000 psi (at 150 psi nominal) and 3000 to 10000 psi (at 3000 psi nominal). With minimum volume and no pressure, vernier can also provide 0 to 1.7 psi.
Larger volumes provide smaller range of adjustment, but greater resolution. For use with 700, 750P, 710 and 720 Series.
Stock by Location
Location | In Stock |
---|---|
MINNEAPOLIS | 0 |
Group: | Inspection Equipment |
Item #: | 2669 |
Product model number: | 700HTP-2 |
Location: | MINNEAPOLIS |
Suggested Kit: | N/A |