The Megger CFL510G (1001-790) is a handheld, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft. and a 5 km/15,000 ft. maximum range depending on velocity factor selected and cable type. Four output impedances (25, 50, 75, and 100 ohms) are available and a velocity factor between 0.2 and 0.99 will meet any cable test requirements.

The CFL510G has a simple selection option which, together with a four-way control switch, offers an intuitive operation for the user.

The CFL510G is primarily designed for linemen in both the communication and power industries.

The CFL510G provides fast and accurate results when uncovering transmission related problems. It is designed to be carried on a linesman's belt and used in the first line of defense when diagnosing and locating cable faults.

Specific line activities identified by this unit include:

*Bridge taps and splices n Presence of water in the cable
*Opens in tip, ring, or sheath
*Shorts between tip, ring, and/or sheath
*Capacitive networks
*Load coils
*Wet splices and high-resistance splices

The CFL510G is ideal for testing the physical integrity of cables within a network. The unit is also capable of locating illegal cable taps. Specific cable conditions identified include:

*Bends or crimps in the cable
*Cuts or shorts in the cable
*Taps and splits
*Water saturation

The CFL510G is an ideal tool for identifying faults on secondary power cables. This unit identifies:

*Burnouts in aluminum conductors
*Good splices, wet splices, and high-resistance splices
*Shorts between phases

INCLUDES:
1 - CFL510G Handheld TDR (1001-790)
1 - Miniature Clip Test Lead Set (6231-652)
1 - Bed of Nails Test Lead Set (6231-653)
1 - Socket BNC to 2x4mm, 50 Ohm (25965-154)
1 - Hard Carrying Case (5410-420)
1 - User Guide CD